Dlink dap 1330 setup
A user can perform the Dlink extender setup process through the Dlink Wi-fi app with the help of which you can configure it remotely anywhere around the world. No user is allowed to configure the extender without performing the installation process. Before performing the setup process through the Dlink Wi-fi app, you need to install it through the app store of the mobile device. You don’t need to use your computer, you can perform both the setup and installation process through the Dlink Wi-fi app of a Dlink extender.
Steps to set up and install dlinkap.local 1330 in the home network through the Dlink Wi-fi app
- First, go to the app store of your mobile device and type the Dlink Wi-fi app on the search button and download it.
- When you have downloaded the Dlink Wi-fi app, launch it and click on the Install New Device option from the main Dlink Wi-fi page.
- Select the “Scan the QR Code” option to start the scanning process through the QR code. The QR code of your Dlink extender is located on the configuration card that is pasted on the back of your device.
- The next window will ask you the option to select the mode with which you want to extend your Wireless network.
- Choose the Wireless option to continue to the further step then tap the Select option.
- Now turn on your range extender by plugging it directly into an electric outlet near your main router.
- Make sure your router is within the suitable range to your range extender to successfully create the connection between both the networking devices.
- Wait for a few seconds after connecting your range extender to the power switch then tap the Next tab.
- When your Dlink 1330 range extender is successfully turned on, tap on the Next tab of the screen open up on your smartphone.
- The range extender starts booting up which might take a few minutes depending upon the hardware of your device.
- Now, you need to select the Wi-Fi network from the given list that you are trying to extend then select the Next tab.
- You also have to type down the Wi-fi password of the network you are extending through the range extender
- Tap the Next tab and now you need to assign the Wi-fi name and network password to the extended network. After assigning the wireless credentials of the extended network tap the Next tab.
- Now assign a password for the Dlink Wi-fi web-based interface with which a user can make changes in the settings of his device.
- After assigning your desired admin password, click on the Next tab to start the configuration process.
Configure your Dlink 1330 range extender using the Dlink Wi-fi app
Steps to configure the Dlink 1330 range extender through the Dlink Wi-fi app
- In the next window, your interface is going to ask you about the installation updated. You either choose the “automatic update method” in which the updates of your devices will get automatically updated.
- If a user chooses a second option i.e “I want to manually update my device” then he has to manage the updates of his device by himself.
- Users are recommended to make a note of all the former configurations they made using the interface of the Dlink Wi-fi app and click on the Save button.
- Once the signal LED turns green, tap the Next tab.
- After the configuration process, you can unplug your dplinkap.local 1330 range extender and move it to a dead Wi-fi zone location where you want the Wi-fi connectivity.
- Once you connect it to another location, tap the Next tab.
- Then turn on the power switch of the power outlet to which you have connected your range extender.
- When your Dlink 1330 range extender gets successfully turned on, click on the Next button
- On the next window, you need to wait for the signal LED to turn green and when the Signals LED turns green click on the Next tab.
- Your Wi-fi network is configured and is ready to allow nearby Wi-fi devices to get connected to your Wi-fi network using the Network Name and Wi-fi password you configured in the previous steps.
Dlink dap 1330 login password change
Steps to change the admin password of the dlinkap.local 1330 range extender
- Open a browser on your computer or laptop to which the local network is connected.
- Go to the address bar of your browser and type dlinkap.local on the address bar of your browser. In case you encounter an error, type the LAN IP address of your extender as the URL of your browser. The LAN IP address of a Dlink 1320 range extender is 192.168.0.50
- Hit the enter button and you will be redirected to the Dlink Extender login window.
- Type down the login credentials within the respective login fields. Type “admin” as the default username and mention the password you typed earlier while logging into the dlinkap.local window. Both the credential fields are case-sensitive.
- Click on the login button and the web setup page of dlinkap.local appears on your screen.
- From the main navigation panel, go to the Management tab then select the Admin option.
- When you click on the Admin option, the page of the Admin tab appears on the screen.
- Scroll down to the Admin Password option and remove the current password then type down the password you want to keep as the login password for the Dlink extender login window.
- Click the Save option to save the configuration you made then click on the Reboot now option to allow the changes to take effect on the dlinkap.local window.
Note: After the dlinkap.local configuration process, a user can change the login password anytime using the web interface of a Dlink 1330 range extender.